Winter can be a harsh time to be a cyclist and with the cold and short days combined with increased rain it can be hard to stay committed. However, the winter can provide new challenges, increase your ability as a cyclist and some rewarding riding can be had.
It is vital to clean the gearing of your bike after every muddy or particularly grubby ride. The more adventurous of you out there may want remove the cassette and clean the sprockets individually for an ultimate clean and degrease. If you are not confident in removing the cassette and dismantling it completely, then taking the wheel out of the drop-outs will give you plenty of access for a comprehensive clean.
Recommended products to use for cleaning the cassette
It is important to keep an eye on the chain as a dirty and worn chain can ruin other, more expensive parts of the drivetrain. Cleaning the chain is quite simple through the use of an enclosed chain tool such as a Muc-Off Chain Doc. This will coat the chain in degreaser and prevent residue dirt from splashing onto other areas of the bike. Once the degreaser has done its job and loosened the grime, use a brush or a sponge to wipe away the dirt and dry with a clean rag. Once left to dry thoroughly, apply Muc-Off Wet Lube.
Recommended products to use for cleaning the chain
This is where a set of brushes come into their own, as you will be able to clean tight spaces without the need to take apart anything. Apply a spray-on cleaner like Muc-Off Bike Cleaner sparingly to grubby areas and leave for a few minutes for the cleaner to set into the dirt and grime. Now use your brushes to scrub away the mud for a clean finish.
Recommended products to use for cleaning the components
Once the moving parts of the bike have been thoroughly cleaned and all residue muck has been wiped away and the parts have dried, use lube like the Muc-Off Wet Lube for lubrication. This is a good time to have a closer look for any wear and tear or need for replacement of any of the moving parts.
Recommended products to use for cleaning moving parts
The frame and wheels are most likely the easiest parts of the bike to clean. Muc-Off Bike Cleaner and a set of brushes is all that’s needed to clean these areas effectively, whilst protecting the paintwork.
Recommended products to use for cleaning the frame and wheels