Online exclusive
{{ vm.state.price.webThumbOverlayCode }}

The Cube Aerium HPA Pro was designed in a wind-tunnel to achieve the optimum in aerodynamics for maximum speed. With a racing pedigree, the aim of the design of the Aerium HPA Pro is to be on top of the podium.

The High Performance Aluminium frame uses elaborate hydroforming to increase rigidity without increasing weight for a fast and grounded ride. Set-up with a carbon fork to keep weight down and an aero, Profile Design wheelset, this is a bike that is fun to ride that also takes the fight to your competitors.

  • BT_CS_bikes: triathlon bikes
  • BT_CS_bikes: Road Bikes

Buyer Information

Bike Type -
TT / Triathlon
Ideal Use -


Aero Hydroform HPA 7005 Ultralight, Triple Butted
Dedacciai Black Fin Carbon Aero
FSA Orbit Z Semi-Integrated 1 1/8"
CUBE Performance Stem Pro, 31.8mm
CUBE Compact Race Bar
Front Brake:
Shimano BR-R561
Rear Brake:
Shimano BR-R561
Brake Levers:
Shimano 105 ST-5800
Gear Shifters:
Shimano 105 ST-5800
Front Derailleur:
Shimano Ultegra FD-6800F, Braze-On
Rear Derailleur:
Shimano Ultegra RD-6800SS, 11-Speed
FSA Trimax Pro, 52x38T, 170mm (S), 172,5mm (M/L/XL)
Shimano CS-5800, 11-28
Profile Design 30/TwentyFour Aero Clincher
Front Tyres:
Conti Grand Sport Race SL, 25-622
Rear Tyres:
Conti Grand Sport Race SL, 25-622
CUBE Aero Prolight


Aerodynamic System
Perfect aerodynamics and geometry adjustment characterize this package to the smallest detail the light and stiff Advanced Twin Mold carbon frame with horizontal dropouts is designed for the use of electronic circuit components to minimize air resistance. Battery and cable are hiding elegantly in the framework and also the brakes fit perfectly together with the Aerium Super HPC carbon fork.
High Performance Aluminium
For our high end bikes we use High Performance 7005 Aluminium alloy which has a very low density combined with high strength due to the alloy elements and the hardening heat treatment. By triple butting or even quadruple butting (as in the REACTION , HANZZ and AERIUM models) to give different wall thicknesses in one tube, aluminium tubes are reinforced where required and made lighter where possible. In this way, we succeed in getting material where its needed most. In addition we use special tube shapes, manufactured with hydroforming technology to better cope with directional forces. The low density and high strength as well as the butting and the hydroforming technology enable us to make high performance frames with an ultimate level of stiffness.
Integrated Cable Routing
Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
  • Productcode: Q2410048

To write a review you need to login or Register.
Your review is successfully sent

Share your thoughts

This field can not be empty

This field can not be empty

This field can not be empty

{{'' | translate}} {{'' + userLang | translate }} {{'' | translate }} {{'' | translate}}
There are no reviews written for this product.